1.斷續(xù)指入口zui大壓力，連續(xù)工作壓力指工作壓差。
2.馬達不應同時在zui高壓力和zui高轉速下工作。
3.馬達在斷續(xù)工作條件下，運行時間應不超過10%。
4.zui高工作溫度80°。
5.馬達zui高允許背壓10mpa，但建議使用背壓不要超過5mpa，超過時應接外泄油管。
6.馬達滿負荷工作前，建議在zui大工作壓力的40%以下磨合1小時。
7.*用68#抗磨液壓油，粘度37-73cst，清潔度iso18/13.
note: 1. intermittent means the entrance of the maximum pressure; continuous working pressure means the differential pressure
2. motor should not work under the highest pressure and the maximum speed
3. the running time should not exceed 10% under intermittent working conditions
4. the maximum working temperature is 80 °
5. the maximum allowable back pressure is 10mpa, but the recommended back pressure should not exceed 5mpa.a leaking pipes is needed when exceeding
6. one hour running time under 40% of maximum working pressure is recommended before full capacity working.
7. recommending n68 anti-wear hydraulic oil, viscosity 37-73cst, cleanliness iso18/13.
![[*] 車輪液壓馬達BM2系列分類（BM）](https://img52.bf35.com/c0ee292ce8e115dd2855d653f89869a7d0c5cbe739c2d41153a06ec761ac89f2a51b7befe203c025_161_128_5.jpg)
![[新品] 行星制動器液壓馬達BM3系列結構（BM）](https://img53.bf35.com/c0ee292ce8e115dd2855d653f89869a75c0f80be018a33f8029d4c7617f543e7a4f775972e626191_161_128_5.jpg)
