QQ交談
MSN交談
產(chǎn)品展示
MBC25SI1TBANAHEIM驅動控制器MBC25SI1TB
- 公司名稱：
- 更新時間：
- 所 在 地：
- 生產(chǎn)地址：
- 瀏覽次數(shù)：
- 昆山恩歐凱自動化設備有限公司
- 2017-07-04 16:55:22
- 蘇州市
- 653
【簡單介紹】
【詳細說明】
ANAHEIM驅動控制器MBC25SI1TB
Features
? Output Current of 2.5A Peak
? 200 to 1600 Steps/Revolution （1, 2, 4 and 8 Selectable Step Operation）
? On-Board Programmable Simple Indexer with 4 motion profiles
? Pulses From 1Hz to 50kHz
? Directional Soft and Hard Limit Switch Inputs
? Clock Output for Daisy Chaining
? Busy Output
? Motor On/Off Input and Automatic Current Reduction
? Short Circuit Protection
? Output Current of 2.5A Peak
? 200 to 1600 Steps/Revolution （1, 2, 4 and 8 Selectable Step Operation）
? On-Board Programmable Simple Indexer with 4 motion profiles
? Pulses From 1Hz to 50kHz
? Directional Soft and Hard Limit Switch Inputs
? Clock Output for Daisy Chaining
? Busy Output
? Motor On/Off Input and Automatic Current Reduction
? Short Circuit Protection
Introduction
The MBC25SI1TB is a low cost single axis step motor driver integrated with a programmable simple
indexer. The MBC25SI1TB microstep driver/pulse generator has an output current capability of 0.5A minimum
to 2.5A maximum （peak rating）. The MBC25SI1TB driver operates with a DC voltage of 12VDC to 35VDC.
The MBC25SI1TB?s internal controller has four different programmable motion profiles. The MBC25SI1TB
also has directional soft and hard limit switch inputs, a busy output and a clock output that can be used for
daisy chaining drivers together. The MBC25SI1TB driver features direction control and motor current On/
Off capabilities. The ?Reduce Current Enabled? feature automatically reduces motor current to 70% of the
set value. The driver has built in features to indicate power on （green LED）, running （yellow LED） and error
conditions （red LED）. The MBC25SI1TB has various step resolutions that can be implemented. These
divisions range from 200 steps/rev to 1600 steps/rev. The bipolar drive configuration handles 4, 6, and 8
lead step motors and is also equipped with short circuit, over temperature and crossover current protection.
The MBC25SI1TB communicates via RS232 communication. The easy to use Windows software, SMPGSMSI
Software, is used to directly set up to four different motion profiles.
The MBC25SI1TB is a low cost single axis step motor driver integrated with a programmable simple
indexer. The MBC25SI1TB microstep driver/pulse generator has an output current capability of 0.5A minimum
to 2.5A maximum （peak rating）. The MBC25SI1TB driver operates with a DC voltage of 12VDC to 35VDC.
The MBC25SI1TB?s internal controller has four different programmable motion profiles. The MBC25SI1TB
also has directional soft and hard limit switch inputs, a busy output and a clock output that can be used for
daisy chaining drivers together. The MBC25SI1TB driver features direction control and motor current On/
Off capabilities. The ?Reduce Current Enabled? feature automatically reduces motor current to 70% of the
set value. The driver has built in features to indicate power on （green LED）, running （yellow LED） and error
conditions （red LED）. The MBC25SI1TB has various step resolutions that can be implemented. These
divisions range from 200 steps/rev to 1600 steps/rev. The bipolar drive configuration handles 4, 6, and 8
lead step motors and is also equipped with short circuit, over temperature and crossover current protection.
The MBC25SI1TB communicates via RS232 communication. The easy to use Windows software, SMPGSMSI
Software, is used to directly set up to four different motion profiles.
