產品展示

進口高壓電磁閥，進口超高壓電磁閥

點擊瀏覽大圖收藏此產品

公司名稱：
更新時間：
所在地：
生產地址：
瀏覽次數：

廣州西派克閥門制造有限公司
2015-11-30 03:50:24
廣州市
338

【簡單介紹】

閥芯均為不銹鋼活塞式，活塞環不會被介質中的雜質卡死，動密封性能高,壽命長；活塞與金屬閥腔不產生直接摩擦，閥體安裝向無限制；專制線圈，不易燒毀；長時間停止動作重新啟動，動作同樣靈敏；Z低啟動工作壓力0.5MPa。

【詳細說明】

進口高壓電磁閥，進口超高壓電磁閥

德國漢威閥門（）有限公司—廣州總代理

進口高壓電磁閥，進口超高壓電磁閥

產品特點：

閥芯均為不銹鋼活塞式，活塞環不會被介質中的雜質卡死，動密封性能高,壽命長；活塞與金屬閥腔不產生直接摩擦，閥體安裝向無限制；專制線圈，不易燒毀；長時間停止動作重新啟動，動作同樣靈敏；zui低啟動工作壓力0.5MPa。

主要技術參數：

產品規格：DN0.5～DN200

閥體材質：不銹鋼

適用介質：水、氣、油、蒸汽、燃氣、腐蝕流體等

溫度范圍：-100～+200℃

介質粘度：小于50C St（大于時需定制）

防護性能：防水、防爆（Exd IICT5）、防腐

接線方式：接線座式；引線式；插頭式

控制方式：常開、常閉

電源電壓：DC12～127V; AC36～380V

連接方式：內螺紋、法蘭（外螺紋和特殊接口可定做或加轉接頭）

泄漏量：零

工作原理：

常閉：當線圈通電時，先導閥芯吸合，先導孔打開，閥上腔卸壓，活塞靠下腔介質壓力推動，電磁閥打開；當線圈斷電時，先導閥芯靠彈簧復位，先導孔關閉，閥腔由活塞節流孔增壓和復位彈簧的推力，電磁閥關閉。

常開：當線圈通電時，先導孔關閉，閥上腔由活塞節流孔增壓和復位彈簧的推力，電磁閥關閉。當線圈斷電時，先導閥芯靠彈簧復位，先導孔打開，閥上腔卸壓，活塞靠下腔介質壓力推動，電磁閥打開。

規格尺寸：

產品代碼HM810

公稱通徑DN3、DN4、DN5、DN6、DN8

適用壓力0.5～70MPa

接口螺紋G1/4G3/8

閥體材質不銹鋼、304、316等

特殊功能可定制帶手動、帶止回功能

注：出口端壓力大于進口端壓力，介質會反向導通?？砂惭b止回閥或訂制自帶止回功能的閥。

Applications:

Widely used in aerospace, shipbuilding Heavy Industry, petrochemical, water, fire fighting equipment, food and medical equipment, cleaning equipment, landscape irrigation, humidification equipment, hydraulic equipment, testing equipment, water plant, the work pressure in the pipeline 6.4 --- 100MPa system.

Features:

Spool is stainless steel piston and piston rings will not be stuck impurities in the medium, dynamic sealing performance and long life; piston valve chamber with the metal does not produce direct friction, the valve installed to the limit; authoritarian coil, easily burned ; for a long time to restart the stopped action, action as sensitive; minimum start working pressure 0.5MPa.

Main technical parameters:

Specifications:DN0.5 ~ DN200

Body material:Stainless Steel

Medium:Water, gas, oil, steam, gas, corrosive fluids

Temperature range:-100 ~ +200 ℃

Media Viscosity:Less than 50C St （greater than the time to be customized）

Protection performance:Waterproof, explosion-proof （Exd IICT5）, anti-corrosion

Wiring:Terminal Block Type; lead type; male

Control:Normally open, normally closed

Power supply voltage:DC12 ~ 127V; AC36 ~ 380V

Connection:Thread, flange （male and special interfaces or add custom adapter）

Leakage:Zero

How it works:

NC: When the coil is energized, the pilot spool pull the pilot hole to open, pressure relief valve on the chamber, the piston on the lower chamber medium pressure to promote, the electromagnetic valve is opened; When the coil power, the pilot valve by the spring return, pilot hole closed throttle valve chamber pressurized by the piston return spring and thrust, the electromagnetic valve is closed.

Normally Open: When the coil is energized, the pilot hole closed, the valve chamber and pressurized by the piston return spring throttle thrust, the electromagnetic valve is closed. When the coil power, the pilot valve by the spring return, pilot hole open, pressure relief valve on the chamber, the piston on the lower chamber medium pressure to promote the solenoid valve open.

Size:

Product CodeDM808

DN1、DN3、DN4、DN5、DN6、DN8

Apply pressure1 ~ 200 MPa

Interface ThreadG1 / 4G3 / 8

Body material304 stainless steel （316）, etc.

Special FeaturesCan be customized with a manual, with a return function）

Note: The outlet pressure is greater than the inlet pressure, the media will pass anti-wizard. Can be installed or custom built non-return valve function of the valve.


留言框
感興趣的產品：	*
留言內容：
您的姓名：	*
您的單位：
聯系電話：	*
微信：
常用郵箱：
詳細地址：
省份：	*
驗證碼：	* = 請輸入計算結果（填寫阿拉伯數字），如：三加四=7
是否接受其他廠商報價:	* 匹配5家以內供應商匹配5~10家供應商匹配10家以上供應商不接受