【Q45F三通球閥結構圖】 Q45F三通球閥產品特點: 一、兩閥座密封三通球閥結構緊湊、外型美觀、密封性能好。它能實現對管道中介質流向的切換。也能使相互垂直的兩個通道連通或關閉。（如流向圖A）
二、四閥座密封三通球閥造型美觀，結構緊湊合理，它不僅可實現介質流向的切換，也可使三個通道相互連通，同時也可關閉任一通道，使另外兩個通道連通，靈活控制管路中介質的合流或分流。（如流向圖B） Features 1. In the double-seat sealing design, the 3-way ball valve enjoys compact structure,goodly configuration and favorable sealing performance. The valve could make a realization the switching of flow direction of the medium inside the pipeline, furthermore, it also could connectshut-down the two orthogonal passages.（As shown in Flow Graph A）
2.In the 4-seat sealing design, the 3-way ball valve enjoys reasonable, compact structure and goodly configuration. The valve could not only make a realization the switching of flow direction of the medium inside the pipeline, but also connect the 3 passages on another. Meanwhile, the valve also features the capacity of shutting-down one of the 3 passages while connecting the other 2 ones for the flexible control of the convergent flowshunting of the medium in pipelines.（As shown in Flow Graph B） Q45F三通球閥主要零件材質Main Patrs and Materials 零件名稱
Accessory name | 材 質 Material | | GB | ASTM | 閥體、閥蓋
Body,bonnet | WCB | A216-WCB | 密封圈
Sealing Ring | PTFE、對位聚苯
PTFE、Counterpoint polypheny1 | PTFE、對位聚苯
PTFE、Counterpoint polypheny1 | | 球體 Ball | 1Cr18Ni9Ti | SS 304 | 閥座、閥桿
Seat、Stem | 2Cr13 | A246-416 | 雙頭螺柱
Dual-head double-screw bolt | 35CrMoA | A193-B7 |
備注：三通球閥一般采用兩閥座結構，如流向圖A所示兩種工況。選用兩閥座L型結構（即Q44型）。流向圖B中①和④兩種工況亦可選用兩閥座T型結構（即Q45型）。流向圖B 中②和③兩種工況必須選用四閥座T型結構（即Q45型）。
其余工況也可選用四閥座結構,但應在訂貨合同中注明閥座結構。如閥門有其它要求請參閱樣本《球閥的型號編制方法》填寫相應的要求代號。 Remarks:
Double-seat configuration design is generally utilized for 3-way ball valve as shown in the 2 operating conditions in Flow Graph A which apply the L-Shaped construction with double-seat（Type Q44）.With regard to the 2 conditions of ① and ④ in Flow Graph B, the T-shaped construction with double-seat could also be applied（Type Q45）.In the ② and ③ conditions in this graph, the choice of the construction must be limited to T-shaped ones with 4-seat（Type Q45）. For other kinds of operating conditions, the construction with 4-seat
could also be applied, however, the construction of the relevant valve seats should be referred in advance in the contract for future delivery. For other requirements please refer to the sample of Organizing Method for Types of Ball Valves and fill in corresponding code numbers as required. Q45F三通球閥主要性能規范 Main Performance Spcification 公稱壓力 PN（MPa）
Nominal diameter | 試驗壓力 Test pressure | 殼體
Shell | 高壓液密封
High-pressure liquid sealing | 低壓氣密封
Low-pressure hermetic sealing | | 1.6 | 2.4 | 1.76 | 0.6 | | 2.5 | 3.75 | 2.75 | | 4.0 | 6.0 | 4.4 | | CLASS150 | 3.O | 2.2 | 適用工況
Applicable
Operating
Mode | 適用介質
Applicable medium | 水、油品、氣等非腐蝕介質和酸堿腐蝕介質
Non-corrosion medium such as water, oil products,
and gas, etc,and nitric acid corrosion medium. | 適用溫度
Applicable temperature | -28-350℃ | 應用規范
Applicable
specification | 連接法蘭
Connecting flange | JB79-59、GB9113、HG20592-97、ANSI B16.5 | 檢驗試驗
Test and inspection | GB9/T 9092-99、API 598 | 其余制造規范均按本廠標準
Other manufacturing standard is according to the standard of our factory. |
Q45F三通球閥主要外型與連接尺寸表Form of Main Types and Connecting Dimension | 公稱壓力或壓力級 Nominal pressure | 主要尺寸 Main dimension | 公稱通徑 | | 15/1/2″ | 20/3/4″ | 25/1″ | 32/11/4″ | 40/11/2″ | 50/2″ | 65/21/2″ | 80/3″ | 100/4″ | 125/5″ | 150/6″ | 200/8″ | | PN1.6MR | L | 150 | 150 | 180 | 200 | 220 | 240 | 260 | 280 | 320 | 380 | 440 | 550 | | PN2.5MPa | L1 | 75 | 75 | 90 | 1OO | 1 O | 120 | 130 | 140 | 160 | 190 | 220 | 275 | | PN4.OMR | H | 90 | 90 | 102 | 115 | 135 | 140 | 155 | 185 | 21O | 275 | 305 | 335 | | CLASS1 50 | W | 140 | 140 | 155 | 250 | 250 | 350 | 350 | 420 | 700 | 1000 | 1300 | 1800 |
當您與我們?nèi)〉脮r(shí)，請您提供的詳細規格要求，這將有助于我們給您提供一個有效的服務。當您有任何疑問，您可以來電告知我們,我們一定會盡心盡力為您提供優質的服務。
訂貨須知：（國家標準）
一、A:產品名稱、產品型號、公稱通徑B:運用介質及溫度、壓力范圍C:是否有附件、實驗檢驗標準、交貨期、特殊要求等事宜、以便我們的為您正確選型?！鹃l閥站：http://www.shqzfamen.com】
二、若已經由設計單位選定我公司的三通球閥型號，請您根據三通球閥參數直接與我們銷售中心訂購。【球閥站：http://www.shqzvalve.com】
三、當您使用的場合非常重要或環境比較復雜時,請您盡量提供設計圖紙和詳細參數，由我們的高級工程師專家會專心為您審核與分析?！菊{(diào)節閥：http://www.shqzfm.com】
我們可以為您提供專業的解決方案，包括設計、定做、成套、運行、服務。上海奇眾閥門制造有限公司立志成為世界的閥門制造商。我們一直致力于閥門行業領域的*，為您提供的閥門知識、的服務、*的技術顧問?！菊荆篽ttp://www.shqzv.com】 |
會員1.png)
