溢流閥 排渣閥 卸料閥 平衡閥 管夾閥 蝶閥 球閥 截止閥 閘閥 柱塞閥 控制閥 燃?xì)忾y 安全閥 針型閥 隔膜閥
無錫氣動技術研究所有限公司
會員1.png)
無錫氣動技術研究所有限公司
閱讀：252發布時間：2016-3-17
ISO 15552
Pneumatic fluid power -- Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm -- Basic, mounting and accessories dimensions
氣壓傳動——可拆卸安裝件、使用壓力1000kPa（10巴）、缸徑從32mm到320mm的氣缸——基本尺寸、安裝尺寸以及附件尺寸。
ISO 15552:2004 established a metric series of basic, mounting and accessories dimensions as required for interchangeability of single- or double-rod pneumatic cylinders, with or without provision for magnetic sensors for a maximum rated pressure of 1 000 kPa (10 bar)
It is applicable to pneumatic cylinders with detachable mountings.
ISO 15552-2004：氣壓傳動中的氣缸標準規范。規定了zui大使用壓力1000KPa(10bar)、內置磁環或不帶磁環單桿或雙桿氣缸，具有互換性所需的公制的基本尺寸、安裝尺寸以及附件尺寸。
本標準適用于可拆卸安裝件氣缸。
ISO 15552 was prepared by Technical Committee ISO/TC 131, Fluid power systems, Subcommittee SC 3, Cylinders.
ISO 15552由技術委員會ISO/TC 131（液體動力系統）的子委員會SC 3（氣缸）制定。
This first edition of ISO 15552 cancels and replaces ISO 6431:1992.
ISO15552的*版標準已經廢止。ISO6431:1992已經被ISO 15552替代。
FESTO符合ISO ISO 15552標準的氣缸系列：DNC、DNG、DNGZK、DNGZS、DSBC、DSBF、DSBG
SMC符合ISO ISO 15552標準的氣缸系列：C96(CP96)
ISO 21287
Pneumatic fluid power -- Cylinders -- Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm .
氣壓傳動——氣缸——使用壓力1000kPa（10巴），缸徑從20mm到100mm的緊湊型氣缸。
ISO 21287:2004 establishes a metric series of single rod pneumatic compact cylinders with bores of 20 mm to 100 mm for use of at maximum working pressure of 1 000 kPa (10 bar) with and without magnetic function. This series of pneumatic cylinder is not equipped with adjustable cushioning. Therefore, the application is restricted to those systems where adjustable cushioning is not required.
Cylinders with bores of 20 mm and 25 mm can be used with end cover mountings in accordance with ISO 21287:2004. Cylinders with bores from 32 mm to 100 mm can be used with end cover mountings in accordance with ISO 15552. Piston rod mountings can be used for the different bores in accordance with ISO 8139 and ISO 8140.
ISO 21287 was prepared by Technical Committee ISO/TC 131, Fluid power systems, Subcommittee SC 3, Cylinders.
This International Standard establishes a metric series of single rod pneumatic compact cylinders with bores of 20 mm to 100 mm for use of at maximum working pressure of 1 000 kPa (10 bar1)) with and without magnetic function.
This series of pneumatic cylinder is not equipped with adjustable cushioning. Therefore, the application is restricted to those systems where adjustable cushioning is not required.
Cylinders with bores of 20 mm and 25 mm can be used with end cover mountings in accordance with this International Standard. Cylinders with bores from 32 mm to 100 mm can be used with end cover mountings in accordance with ISO 15552. Piston rod mountings can be used for the different bores in accordance with ISO 8139 and ISO 8140.
（為防原創文章被盜用，此段未翻譯。如需了解，請氣動在線，或在文章下方留言。如需轉載，請加氣動在線鏈接。）
FESTO符合ISO ISO 21287標準的氣缸系列：ADN、ADNP、AEN、CDC
SMC符合ISO ISO 21287標準的氣缸系列：C55
ISO 6432:1985
Pneumatic fluid power -- Single rod cylinders -- 10 bar (1 000 kPa) series -- Bores from 8 to 25 mm -- Mounting dimensions
氣壓傳動——單桿氣缸——使用壓力10巴（1000kPa）以下——缸徑8到25mm——安裝尺寸
Establishes metric mounting dimensions for cylinders as required for interchangeability of commonly used hydraulic cylinders. Includes the bore sizes as follows: 8, 10, 12, 16, 20, 25 mm. Gives the following mounting styles: MR3, MP3, MS3, MF8 (tables 2 and 3, figures 2 and 3). Figure 1 and table 1 contain the basic dimensions.
規定了一般用途的氣缸，具有互換性所需的公制安裝尺寸。缸徑包括：8、10、12、16、20mm。安裝形式如下：MR3、MP3、MS3、MF8（表2、3和圖2和3）。圖1和表1包含了規定的基本尺寸。
泵閥商務網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份