會員1.png)
產品展示
無凹槽電動刀閘閥
- 公司名稱：
- 更新時間：
- 所 在 地：
- 生產地址：
- 瀏覽次數：
- 奇勝閥門制造有限公司
- 2017-09-23 15:22:28
- 溫州市
- 274
【簡單介紹】
【詳細說明】
無凹槽電動刀閘閥
nongroove electric knife gate valve
電動刀閘閥鑄鐵閥體采用整體式結構刀閘閥,包括閥體,閘板和U型密封條,閥體中腔底部設有凹槽并裝有彈性U型密封條,當閥門關閉時閘板下移,閘板底部邊緣與密封條接觸進而壓縮密封條進入凹槽中實現閥體和閘板的密封;當?shù)堕l閥開啟時閘板上移,閘板底部邊緣與密封條脫離,密封條彈起與凹槽平整,能防止刀閘閥在使用過程中,介質沉淀物積存在閥體中腔的凹槽里，不易堵塞、無殘留，管道清洗方便，從而有效提高刀閘閥的密封效果,防止閥門關閉時泄漏。使用壽命更長，維護更簡單；法蘭密封面鑲O型圈，無須另配法蘭墊片，安裝簡單方便，磨擦系數小，啟閉靈活，該系列刀閘閥可配電動可通過現場控制箱、現場電裝按鈕、遠程PLC電動智能控制等附件可以完成開、關和調試的動作的自動控制。用戶可根據實際需要進行選擇。
Cast Iron , with the overall structure,electric knife gate valve includes body,disc and U-seal, groove and flexible U-seal at the bottom of the cavity. Disc is moved down when valve is closed, the bottom edge of disc meets with the seal and then compresses into the groove to achieve sealing . Disc is moved up when knife gate valve is opened, the bottom edge of disc breaks from seal,
Seal bounces up with groove formation to prevent media accumulated in the body cavity , not blocked easily and residue, pipe is cleaned easily ,and to prevent leakage when knife gate valve is closed .That improves knife gate valve's sealing effect effectively . With longer service life, simply maintenance ,flange O-ring sealing , without changing flange gasket,simply installation and small friction coefficient ,flexibly opening and closing, the series knife gate valve can be equipped with electric and controlled through on-site boxes, on-site Denso button and remote PLC inligent to achieve open and close. Users can choose based on themselves needs.
產品型號：QUZ973X-10
外型結構:凸耳
公稱通徑范圍：DN40-DN800
公稱壓力范圍：國標、美標、日標、德標、英標
材質：鑄鐵、球墨鑄鐵
閘板材質： 201、304、316、316L
輸入信號：調節式: 4~20mADC
連接形式：法蘭、對夾
閥座密封圈：丁腈橡膠、三元乙丙橡膠
填料密封：含油四氟盤根
適用介質：污水、粉體顆粒、紙漿
Model:QUZ973X-10
Exterior structure: lugged
Normal diameter:DN40-DN800
Pressure standard: national standard、American standardd、Japanese standard 、German standard、British standard
Material:cast iron、Ductile cast iron
Disc:201、304、316、316L
Input signal : adjustable :4~20mADC
Connection: flange 、wafer
Seat ring :NBR、EPDM
Sealing filler: PTFE
Media:swage、power、 paper pulp、ore pulp、cinde
